Latex Paint Manufacturer

Latex Paint Manufacturer
Product Introduction:
Latex paint is a water-based coating that uses synthetic resin emulsion as its base and water as the dispersion medium. It is known for being environmentally friendly, easy to apply, and quick-drying. Modern latex paint employs advanced formulation technology to achieve excellent performance in color presentation, weather resistance, stain resistance, and durability. It is suitable for various interior and exterior wall decorations, providing aesthetic appeal and long-lasting protection for living and working spaces.
Send Inquiry
Description
Technical Parameters

Product Description

 

 

Texture paint is a paste-type or heavy-bodied coating that is applied thickly and manipulated with tools such as rollers, trowels, or spray guns through pulling, rolling, scraping, or smearing actions to create patterned or random three-dimensional texture effects on the surface. It is not merely about color coverage but an artistic creation resulting from the synergy between "material" and "technique."

Core features and advantages of the product
20260120132756379127

Three-dimensional artistic texture, unlimited creative possibilities

It can create various textures: small brushed texture, large brushed texture, bark texture, sandstone texture, relief dot texture, wave texture, etc.
The texture and color can be freely combined. Under the changes of light and shadow, it has a strong sense of layering and expressiveness. It can imitate the visual effects of expensive materials such as natural stone, leather and plaster, with lower cost and higher design freedom.

20260120132408375127

Outstanding elastic crack resistance, active defense system

The paint film has high tensile strength and excellent elongation at break (up to over 300%). When the base surface of the wall develops hairline cracks due to thermal expansion and contraction or slight settlement, the paint film can stretch along like a "rubber band", effectively covering and preventing the cracks from extending to the surface, maintaining the overall aesthetic appearance of the wall. This is beyond the reach of ordinary rigid coatings.

20260120133106380127

Super weather resistance and durability, becoming more and more new over time

With pigments and resins of excellent UV resistance, it can resist long-term exposure to intense sunlight, rain erosion and frost erosion, and is not prone to powdering, fading or peeling. Its service life far exceeds that of ordinary exterior wall coatings, significantly reducing long-term maintenance costs.

20260120132734378127

Excellent waterproof vapor permeability, allowing the wall to breathe healthily

The coating forms a dense network structure, which can effectively prevent liquid water from seeping into the wall and prevent leakage and mold. Meanwhile, its micro-porous structure allows water vapor molecules to pass freely, expelling the moisture inside the wall and avoiding problems such as bubbling and peeling, ensuring the dryness and health of the building structure.

 
 
20260120133159381127

Highly efficient anti-fouling and self-cleaning, easy to maintain

The surface is dense, smooth and hydrophobic, making it difficult for ordinary dust and stains to adhere. Self-cleaning can be achieved simply by being washed by rainwater. For stubborn stains, it is also easy to scrub with a neutral cleaner to keep the exterior walls clean for a long time.

Green, environmentally friendly and safe, a reassuring choice

The entire process is free from the addition of harmful substances such as formaldehyde, lead, and mercury. It has passed authoritative tests such as the China Environmental Label (Ten Rings) Certification and is suitable for places with extremely high environmental protection requirements such as schools, hospitals, and residences.

It has good adaptability to the base surface and can be applied on various base materials such as cement mortar, concrete, gypsum board and insulation layer. The product has excellent thixotropy, smooth application, is not prone to sagging, and the texture shaping is easy to control, reducing excessive reliance on the technical skills of construction personnel

H071dce1a4b034c7f8c2353b6bb23c89dKjpg350x350

 

 

 

Application Guide

 

 

Substrate Preparation: Must be solid, flat, clean, dry (moisture content <10%), free of oil and loose materials. For old walls, remove all powdery layers completely and repair with leveling filler. Application of an alkali-resistant primer is recommended.

Material Preparation: Stir slightly after opening; do not dilute with water. For coloring, use dedicated colorants and mix slowly and uniformly.

Texture Creation:

Method A (Trowel & Texture): Apply coating evenly to wall with a trowel, thickness approx. 1-2mm. Immediately use a dedicated texture roller (chosen based on desired pattern size) to roll/pull vertically or horizontally to create texture. Teamwork is essential for continuous operation on wet film.

Method B (Spray Texture): Use a dedicated spray gun and nozzle to create granular textures of varying sizes by adjusting air pressure and material output.

Curing: Protect from rain and strong physical impact within 24 hours after application. Full drying/curing takes approximately 7 days, during which performance gradually reaches optimum.

 

Precautions

 

 

Application Environment: Temperature between 5°C and 35°C, air humidity below 85%. Avoid application in strong wind, rain, or snow.

Product Storage: Store in a cool, dry place between 5°C and 35°C. Typical shelf life is 12 months in unopened, original packaging.

Texture Consistency: For a single wall, it is recommended that the same team use the same batch of material to complete the work continuously, ensuring uniform texture and color.

System Compatibility: Strongly recommend using the dedicated, matching alkali-resistant primer to enhance adhesion, prevent efflorescence, and optimize topcoat consumption.

 

S04YXDWO423T491A8L25

 

Reference Dosage

 

 

3 .5~5kg/m2

 

FAQ

 

 

20260120132448376127

Q1: Difference between texture paint and regular paint?

A: 3D textured finish, elastic & crack-resistant, superior protection.

Q2: Can it be used indoors? Is it eco-friendly?

A: Yes, for both interior & exterior. Eco-friendly, low VOC, non-toxic.

Q3: Are colors and textures customizable?

A: Yes. Colors are adjustable. Textures (e.g., bark, sandstone) are created with tools.

Q4: Substrate requirements?

A: Solid, flat, clean, dry. Application of专用 alkali-resistant primer is mandatory.

Q5: Is application difficult? DIY possible?

A: Requires professional tools & skills. DIY possible for small areas; hire professionals for large projects.

Q6: Application environment requirements?

A: Temperature 5-35°C, humidity <85%, no rain or strong wind.

 

 

 

 

 

 

Hot Tags: latex paint manufacturer, China latex paint manufacturer manufacturers, suppliers, factory, Mildew Resistant Paint for Walls, paint varieties, paint for bungalows, paint stirrers, paint for buildings, paint for hospitals

技术参数(参考值)Technical parameters (reference values)

项目 Item 技术指标 Technical Index 测试标准 Test Standard
容器中状态 In-can state 均匀膏状体,无结块 Homogeneous paste, no lumps GB/T 9755
施工性 Application 喷涂,刮涂无障碍 No obstruction for spraying, troweling GB/T 9755
干燥时间(表干) Drying time (Touch dry) ≤ 2 小时 (hours) GB/T 1728
耐碱性(48h) Alkali resistance (48h) 无异常 No abnormality GB/T 9265
耐水性(96h) Water resistance (96h) 无异常 No abnormality GB/T 1733
涂层耐温变性 Coating temperature change resistance (5次循环) 无异常 (5 cycles) No abnormality GB/T 9755
断裂伸长率 Elongation at break ≥ 250% GB/T 16777
抗拉强度 Tensile strength ≥ 1.5 MPa GB/T 16777
耐沾污性 Stain resistance ≤ 15% GB/T 9755
耐人工气候老化性 Artificial weathering resistance 800h 不起泡,不剥落,无裂纹 No blistering, peeling, cracking GB/T 1865
挥发性有机化合物(VOC) ≤ 50 g/L GB 18582
Send Inquiry
Qualified Products
While ensuring the excellent quality
of all products
contact us