Bonding Mortar Construction Mingshida

Traditional cement mortar has poor adhesion, and it is easy to appear hollowing, cracking and falling off when bonding insulation boards, stone, ceramic tiles and other materials, especially in outdoor environments with large temperature differences, which greatly shortens the project service life and increases the risk of later repair and safety accidents. Our bonding mortar has ultra-high tensile bonding strength, which can firmly grasp the base material and the veneer material, and there is no hollowing and falling off even after long-term wind, rain, freeze-thaw cycles.

Traditional mortar loses water quickly on porous base materials such as aerated concrete blocks and brick walls, resulting in rapid solidification of slurry, difficult scraping and coating, short operable time, and unable to meet large-area continuous construction. This bonding mortar has excellent water retention performance, keeps the slurry in a good working state for a long time, is easy to scrape and spread, reduces construction difficulty, and improves construction efficiency.

In areas with high temperature, severe cold, high humidity or frequent freeze-thaw cycles, ordinary bonding materials are prone to aging, embrittlement and strength reduction, leading to project quality damage. Our bonding mortar has excellent anti-freeze-thaw, high temperature resistance and water resistance, and can maintain stable bonding performance in various extreme climatic environments worldwide.

Manual on-site mixing of mortar is prone to uneven material ratio, insufficient stirring, resulting in unstable product strength, local weak bonding and other quality hidden dangers. Factory pre-mixed bonding mortar realizes precise batching and uniform mixing, ensuring stable product quality in each batch and avoiding human error.

The frequent quality problems of bonding layer mean high maintenance costs, long maintenance period and great impact on the normal use of buildings. The long-term durability of this bonding mortar is outstanding, which greatly reduces the later maintenance frequency and cost, and extends the overall service life of the building

This product adopts imported high-performance polymer modification formula, which forms a dense and tough bonding layer between the base material and the veneer material. The tensile bonding strength is far higher than the international standard, and it has excellent positive and negative wind pressure resistance. Whether it is bonded to lightweight insulation boards, natural stone, ceramic tiles or aerated blocks, it can achieve permanent firm bonding, completely eliminating the risk of hollowing and falling off, and ensuring the structural safety and stability of the project.

The slurry has good flexibility, smooth texture, strong scraping and coating performance, long open operating time, no dry spraying, no wire drawing, and no segregation. It can adapt to manual construction and mechanical spraying construction, reducing the labor intensity of workers. Under the same construction area, the construction efficiency is 30% higher than that of traditional mortar, shortening the project construction period and saving labor costs.

It has excellent anti-freeze-thaw cycle performance, water resistance, alkali resistance and high temperature aging resistance. It can be used normally in high temperature areas in the Middle East and Southeast Asia, cold areas in Europe and America, and high humidity coastal areas. The product performance does not attenuate for a long time, and it is always stable and reliable, meeting the construction needs of various climatic zones around the world.

Adopt fully automated production line, precise computer batching, strict raw material selection and finished product testing, to ensure that each batch of products has uniform composition and stable performance. No on-site batching is required, which avoids the quality fluctuation caused by manual proportioning, and the construction quality is more controllable, fully meeting the requirements of high-standard engineering projects.

It is suitable for bonding construction of various building base materials (concrete, brick wall, aerated concrete block, lightweight partition board) and various decorative / insulation materials (extruded board, polystyrene board, rock wool board, stone, ceramic tile, cultural brick). It realizes one product for multiple purposes, reduces the types of construction materials, simplifies material management, and greatly saves material procurement costs and management costs for customers.

The product does not contain formaldehyde, benzene and other harmful volatile substances, low VOC content, no pollution to the environment and construction personnel, in line with international green building material standards. At the same time, the dry powder packaging is easy to transport and store, no material waste is generated during construction, and it meets the global low-carbon construction and green engineering requirements.

Although the unit price of single product is slightly higher than that of ordinary mortar, its bonding efficiency and durability are greatly improved. The amount of single construction area is less, the later maintenance cost is almost zero, the construction period is shortened, and the labor cost is saved. The overall comprehensive construction cost is reduced by more than 20% compared with traditional materials, bringing real cost reduction and efficiency increase benefits to global customers.